Xerox 850DP - Phaser Color Solid Ink Printer Manual page 71

Floppy Disk Drive
Configuration
Folding Device
Configuration
Hard Disk Drive
Configuration
IOT Firmware Revision
Fax/Modem Present
Network Card Hardware
Address
Network Interface Card
Revision
Network Connection Type
Printer Commercial Name
Version 10.0
AccXES PJL Interface
FDDPRESENT
FINISHERTYPE
HDDPRESENT
IOTSWREV
MODEMPRESENT
NICHWADDR
NICSWREV
NICTYPE
PRINTERNAME
Page 66 of 160
R, Bool TRUE when a floppy disk
drive is present in the
system. Range: {TRUE,
FALSE}
R, Enum Describes the type of
finishing device present in
the system. Range: {NONE,
GERA_ISO, GERA_ANSI,
GERA_ANSI_SPECIAL,
GFI_FINISHER}
R, Bool TRUE when a hard disk
drive is present in the
system. Range: {TRUE,
FALSE}
R, String A string representing the
firmware revision of the
IOT. Range: Max 32
character string.
R, Bool TRUE when a Fax or
Modem is available in the
system. Range: {TRUE,
FALSE}
R, String A string representing the
network interface card's
hardware address. The
format is xx:xx:xx:xx:xx:xx.
Range: Max. 17 character
string.
R, String A string representing the
firmware revision of the
Network Interface Card.
Range: Max 32 character
string.
R, Enum Describes the type of
network interface card
which is present in the ESS.
Range: {NONE,
THER10B,
ETHER100B,
R, String The printer's commercial
name. Range: Max 64
character string. The
default value is based on
the IOT type and is one of:
"WIDE FORMAT PRINT
SYSTEM 8830",
"WIDE FORMAT PRINT
SYSTEM 8825",
"WIDE FORMAT PRINT
SYSTEM 8855",
"WIDE FORMAT PRINT
SYSTEM 8850",
"WIDE FORMAT PRINT
SYSTEM 510 SERIES",
"WIDE FORMAT PRINT