Accxes Custom Commands; Comment Commands; Xesaccounting; Pre 6.2 Command Syntax - Xerox 850DP - Phaser Color Solid Ink Printer Manual

4 AccXES Custom Commands

4.1 COMMENT Commands

This section overviews theXerox custom commands unique to AccXES. These new commands are
defined innocuously to HP-PJL by embedding them in the existing COMMENT function. For example,
the syntax for theXESCANCEL command is:
@PJL COMMENT XESCANCEL (USERJOBID=<user job id> | NAME="<JOB name>")

4.1.1 XESACCOUNTING

This command is used for managing copy, scan, and print job accounting. For this command to be
valid, the job containing this command must also have a valid password.

4.1.1.1 Pre 6.2 Command Syntax

The syntax for the XESACCOUNTING command is:
@PJL COMMENT XESACCOUNTING ACTION=<action> [ACCTNUM=<account #>
SUBACCTNUM=<subaccount #>] [UNITS=<units>] [B=<bond area #> V=<vellum area #> F=<film
area #> S=<scan area #>]
ACTION is a mandatory entry. It can be followed with ACCTNUM and SUBACCTNUM, which if valid
will restrict the action to an account or a single subaccount. The following table lists the valid
assignments to ACTION, as well as the additional entries required to successfully parse the command.
For those commands which apply to all accounts (deleteall, resetuser, resetsystem, resetall) an account
number MUST NOT be supplied. If an account is supplied the PJL command will be rejected.
Table: XESACCOUNTING Options
ACTION ACCT NUM
CREATE Required
Will not overwrite
an existing
account
DELETE Required
DELETEALL None
RESET Required
RESETUSER None
RESETSYSTEM None
RESETALL None
RESTORE Required
Will overwrite
existing accounts
Version 10.0
AccXES PJL Interface
MEDIA(B,V,F or S)
Ignored.
All media values are set to
'0'
Ignored
Ignored
Ignored.
All media values are set to
'0'
Ignored.
All media values are set to
'0'
Ignored.
All media values are set to
'0'
Ignored.
All media values are set to
'0'
Optional.
unspecified values set to
'0'
Page 9 of 160
UNITS
Ignored
Ignored
Ignored
Ignored
Ignored
Ignored
Ignored
Require
d