Xerox 850DP - Phaser Color Solid Ink Printer Manual page 63

Render Mode
Under Size Margin
Use Marked Area
Version 10.0
AccXES PJL Interface
RENDERMODE
UNDERSIZEMARGIN
USEMARKEDAREA
Page 58 of 160
this value depends on the
value of
RASTERSTAMPSCALEMO
DE. If the mode is
RELATIVE, then this value
is a percentage. The stamp
will be autoscaled to this
percentage of the printable
area of the page. A value of
100% is equivalent to
autoscaling to the paper. If
the mode is ABSOLUTE,
then this number is an
absolute scaling percentage
applied to the stamp.
Range: {10 – 999%}.
R/W, Std, Sets the intended color
Enum model of the printers
rendering mechanism.
Range: {COLOR,
GRAYSCALE} Default:
product dependent
R/W, When PAPER is set to a
Integer value for auto size detection
(ANY, ANY_ANSI,
ANY_ARCH, ANY_ISO, or
ANY_JIS), then this
parameter determines the
threshold for rounding the
selected paper size up to a
standard paper size. If both
dimensions of the image
(including justification) are
smaller than a standard
papers size by less than the
percentage stored in this
parameter, then this paper
size is chosen. Range:
{0-100%} Default: 2%
R/W, Bool When PAPER is set to a
value for auto size detection
(ANY, ANY_ANSI,
ANY_ARCH, ANY_ISO, or
ANY_JIS), then this
parameter determines
whether the size of the
image used to determine
paper size and image
placement is taken from the
actual bounding box of
marks on the page (ON), or
specified by data format
dependant page size
commands if available
(OFF). Range: {ON, OFF}
Default: OFF