Xerox 850DP - Phaser Color Solid Ink Printer Manual page 126

Version 10.0
AccXES PJL Interface
NAME FANFOLD CROSSFOLD WIDTH LENGTH MARGIN PUNCH TAB BINS (cont'd
below)
<name> <fanfold> <crossfold> <width> <length> <margin> <punch> <tab> <bins>(cont'd below)
MAXLENGTH SHEETDELIVERY TITLE EDGE
<maxlength> <sheetdelivery> <title> <edgepreference>
<FF>
Where the following are defined:
< GFI Model Number > is the model number string.
< GFI Interface Level > is a string specifying the version of GFI specification compliance that the
attached finishing device supports.
< Number of GFI Finishing Programs > is the number of folder programs supported by the attached
finisher. Range: 0 to 20
< Number of bins > is the number of bins that the finisher supports. Valid range is 1 to 13. Note that
bin 0 is a "don't care" value that will use any available finisher bin, bin 14 is the fanfold output bin, and
bin 15 is the bypass bin.
FANFOLDS defines which fan-fold styles are supported by the attached finisher.
CROSSFOLDS defines which cross-fold styles are supported by the attached finisher.
PUNCH defines which punch styles are supported by the attached finisher
TAB defines which tab styles are supported by the attached finisher
< minimum margin length > and < maximum margin length > specify the range of valid margin lengths
that are supported by the finisher (in millimeters). A length of zero is always valid and should not be
included in the definition of this range.
< name > is the GFI Program Description, which is a string of up to 32 characters (using the ISO
Latin1 character set) containing the text string description of the folding program.
< fanfold > is the fanfold style for the program. It will be one of the enumerated values defined under
FANFOLDS above.
< crossfold > is the crossfold style for the program. It will be one of the enumerated values defined
under CROSSFOLDS above
< width > is the dimension of the finished package size across the fanfolds in millimeters. Range:
1-65,535
< length > is the dimension of the finished package size across the crossfolds in millimeters. Range:
1-65,535
< margin > is the width of the margin for the folding program in millimeters. Range: 0-255
< punch > is the hole punch style for the program. It will be one of the enumerated values defined
under PUNCH above.
Page 121 of 160