Xerox 850DP - Phaser Color Solid Ink Printer Manual page 43

CalComp Termination on
Manual command
CalComp Termination on
New Plot command
CalComp Termination on
Pause command
CalComp Termination on
Search Address
CalComp Termination on
Start Plot command
Version 10.0
AccXES PJL Interface
CCTERMMANUAL
CCTERMNEWPLOT
CCTERMPAUSE
CCTERMSA
CCTERMSTARTPLOT
Page 38 of 160
is found if this value is ON.
OFF implies that the
command has no effect on
file termination conditions.
Range: {ON, OFF} Default:
ON
R/W, Bool Sets the controller to
terminate the CalComp file
when a manual command is
found if this value is ON.
OFF implies that the
command has no effect on
file termination conditions.
Range: {ON, OFF} Default:
OFF
R/W, Bool Sets the controller to
terminate the CalComp file
when a new plot command
is found if this value is ON.
OFF implies that the
command has no effect on
file termination conditions.
Range: {ON, OFF} Default:
OFF
R/W, Bool Sets the controller to
terminate the CalComp file
when a pause command is
found if this value is ON.
OFF implies that the pause
command has no effect on
file termination conditions.
Range: {ON, OFF} Default:
ON
R/W, Enum The controller can be set to
terminate the file when
either or both search
address codes 999, 9999 are
found. Range: { 999, 9999,
BOTH, NONE} Default:
BOTH.
R/W, Bool Sets the controller to
terminate the CalComp file
when a Start Plot command
is found if this value is ON.
OFF implies that the
command has no effect on
file termination conditions.
Range: {ON, OFF} Default:
ON