Xerox 850DP - Phaser Color Solid Ink Printer Manual page 40

TokenRing TCP/IP Port
Enable
Group: Serial Port
Serial Baud Rate
Serial Port Enable
Serial Flow Control
Serial Parity
Group: Parallel Port
Parallel Port Enable
Group: VPI Port
VPI Port Enable
VPI Port Timeout Enable
Class: Printer
Parameters
Group: Printer
Active Parameter Set
AppleTalk Printer Name
Version 10.0
AccXES PJL Interface
TOKENTCPIPENABLE
SERIALBAUD
SERIALENABLE
SERIALFLOWCTL
SERIALPARITY
PARALLELENABLE
VPIENABLE
VPITIMEOUTENABLE
ACTIVEPARAMSET
APPLETALKNAME
Page 35 of 160
R/W, Bool Enables or disables the
TokenRing TCP/IP protocol
on the NIC. Range: {ON,
OFF} Default: ON
R/W, Sets the baud rate of the
Integer serial port. Range: {300,
600, 1200, 2400, 4800, 9600,
19200} Default: 9600
R/W, Bool Enables or disables the
Serial port. Range: {ON,
OFF} Default: ON
R/W, Enum Sets hardware, XON/XOFF,
or no flow control over the
serial port. Range:
{XON_XOFF, RTS_CTS,
OTH, NONE} Default:
NONE
R/W, Enum Sets the parity for the port.
Range: {EVEN, ODD,
NONE} Default: NONE.
R/W, Bool Enables or disables the
Parallel port. Range: {ON,
OFF} Default: ON
R/W, Bool Enables or disables the VPI
port. Range: {ON, OFF}
Default: ON
R/W, Bool Enables the time out
mechanism (specified with
the TIMEOUT variable) on
the VPI port if set to ON.
There is no timeout period
otherwise. Range: {ON,
OFF} Default: OFF
R/W, Sets the currently active
Integer parameter set for the
printer. There are 10 sets
denoted by the integers 0
through 9. Range: {0-9}
Default: 0
R/W, String Sets the printer name for
the EtherTalk, TokenTalk,
and LocalTalk protocols.
Range: String max 32
chars. The default value is:
"XES PRINTER".