Xerox 850DP - Phaser Color Solid Ink Printer Manual page 82

Controller software version 10.0
Hide thumbs Also See for 850DP - Phaser Color Solid Ink Printer:
Table of Contents

Advertisement

To support print job accounting, a job may include this parameter to specify the account number to
charge the media usage to.
5.1.7.1.2 SUBACCTNUM (prior to 6.2)
To support print job accounting, a job may include this parameter to specify the subaccount number to
charge the media usage to.
5.1.7.1.3 ACCTNUM / SUBACCTNUM (Release 6.2)
Release 6.2 maps the values of ACCTNUM and SUBACCTNUM to JBA_ACCT_ID and JBA_USER_ID
respectively.
5.1.7.1.4 JBA_USER_ID (6.2)
To support print job accounting, a job may include this parameter to specify the user identifier to
which media usage is being charged.
5.1.7.1.5 JBA_ACCT_ID (6.2)
To support print job accounting, a job may include this parameter to specify the account identifier to
which media usage is being charged.
5.1.7.1.6 BANNERPAGEENABLE
Banner pages appear once per job when enabled. They may be set to appear before or after a job with
the parameter BANNERPAGEPOS. In a collation, only one banner page is generated, independent of
the number of sets of the job desired. When enabled, banner pages are created for every job excluding
test prints. Note also that malformed jobs which leave extra data at the end of their data section will
generate an apparently spurious banner page. This is because this extra data is not distinguishable
from another job and is treated as a valid job.
To specify its printing operation, a banner page inherits the job processing parameters from the
associated job and page processing parameters of the printer default parameter set with the following
exceptions:
• Paper size is set to ANY
• Rotation is set to AUTO
• Scaling is set to 100%
• Mirroring is set to OFF
The banner page is considered part of the job and would therefore participate in folding. It would not
appear in job status reporting as an independent job. The banner pages contain the following
information:
• The internal job ID number and PJL job name if available.
• The data format (or none if the job is another internally generated print)
• The job's input port (or none if the job is another internally generated print)
• The job size in bytes if the banner page is set to appear after the job, or "NOT AVAILABLE"
otherwise.
Version 10.0
AccXES PJL Interface
Page 77 of 160

Advertisement

Table of Contents
loading

Table of Contents