Palettes, Release - Xerox 850DP - Phaser Color Solid Ink Printer Manual

Version 10.0
AccXES PJL Interface
Patterns named "50" through "64" are use defined patterns which are initially white from the factory.
The user may download any binary 32x32 bit raster pattern into these patterns, although the patterns
themselves cannot be deleted.
Note that the pattern name "0" is reserved for specifying no pattern in palettes.

8.3 Palettes, Release 2.0

There are 9 palettes in the 8830 printer named "0" through "8." Palette "0" is a read-only factory
defaults palette. All palettes have 256 pens.
The factory default palette is initialized as follows. All job override modifiers for each attribute on each
pen are set to 0 to indicate that if the palette is applied, that attribute for that pen will take effect. All
pen widths are set to 0.35mm. All colors are set to black except for pen 0 which is set to white. Pens 1
through 64, 114 through 128, 178 through 192, and 242 through 255 have no pattern assigned ("0") and
let the color field determine the pen's appearance. Pens 65 through 113, 129 through 177, and 193
through 241 have patterns "1" through "49" assigned respectively. Palettes "1" through "8" may not be
deleted; however, their content may be changed. From the factory, palettes "1" through "8" are set with
the contents of the factory palette.8830 Raster stamps, Release 2.0
There are no factory installed raster stamps shipped with the printer.
Page 130 of 160