Xerox 850DP - Phaser Color Solid Ink Printer Manual page 41

Toner Density
Language
Pen Palette Override
WebPMT Main Page
Refresh timeout
Printer Accounting Mode
6.2 and Later Release
Printer Accounting Mode
Printer Password
Timeout
Mismatch Queuing
Version 10.0
AccXES PJL Interface
DENSITY
LANG
PALETTEOVERRIDE
PMTREFRESH
PRTACCTMODE
PRTACCTMODE
PASSWORD
TIMEOUT
MM_QUEUING
Page 36 of 160
R/W, Std., Indicates the toner density
Integer setting. Range: {0 - 10}
Default: 5
R/W, Std., Sets the language of the
Enum printer on its interface and
backchannel messages.
Range: {ENGLISH,
UKENGLISH, FRENCH,
ITALIAN, GERMAN,
EURO_SPANISH,
SAMER_SPANISH,
SAMER_ PORTUGESE,
DUTCH, RUSSIAN,
SWEDISH, TURKISH,
CZECH, UNKNOWN}
Default: ENGLISH. Note
EURO_PORTUGESE was
obsoleted.
R/W, Bool When enabled, a print job
will override the settings of
the pen palette stored in the
printer's memory. Affected
attributes include pen
width, color, and pattern.
Range: {ON, OFF} Default:
ON
R/W, Std., Indicates the timeout value
Integer to refresh the WebPMT
main page. Range: {5-3600}
Default: 10
R/W, Enum Sets the accounting mode
for the printer. Range:
{ENABLED, DISABLED,
OPTIONAL} Default:
DISABLED.
R/W, Enum Sets the accounting mode
for the printer. Range:
{ENABLED, DISABLED,
OPTIONAL} Default:
DISABLED.
.
R/W, Std., The current HP-PJL
Integer password for the printer.
Range: {0 - 65535} Default:
R/W, Std., The time-out period on the
Integer host communications ports
in seconds. Range: {5 - 300}
Default: 5
R/W, Bool Set to true when mismatch
queuing is enabled. Range:
{ON, OFF} Default: OFF