Xerox 850DP - Phaser Color Solid Ink Printer Manual page 54

Fineline Grayscale
Rendering
Fineline Pixel Threshold
Justification, X direction
Justification, Y direction
Label Font
Label Font Object Name
Version 10.0
AccXES PJL Interface
FINELINEGRAYSCALER
ENDERING
FINELINEPIXELTHRES
HOLD
JUSTIFYX
JUSTIFYY
LABELFONT
LABELFONTOBJ
Page 49 of 160
determine which color
transform to apply (if any).
Range:{AUTOSELECT,
GRAPHICS, PHOTO,
LINESANDTEXT} Default:
AUTOSELECT
R/W, Enum Specifies how fine lines will
be rendered (if the
rendermode is set to
grayscale). Range:
{CONTONE, BLACK}
Default: CONTONE
R/W, Specifies the maximum line
Integer width that will be processed
as a fine line. Range: {1 -
25} Default: 7
R/W, Specifies the left margin of
Float/Enum the page on the paper. Can
be specified in inches or
<center>, <left>, <right>.
On roll fed plotters, this
variable refers to the paper
feed direction. Range: {0 -
100, LEFT, RIGHT,
CENTER} Default: LEFT
R/W, Specifies the top margin of
Float/Enum the page on the paper. Can
be specified in inches or
<center>, <top>, <bottom>.
On roll fed plotters, this
variable refers to the raster
scan direction. Range: {0 -
100, TOP, CENTER,
BOTTOM}. Default:
BOTTOM
R/W, Str The name of the font to be
used in the label string.
Range: String max 32
characters. Default: "HP
Stick Set 0"
R/W, Str An alternate method of
specifying the label font. It
specifies the name of the
font object to be used in the
label string. Range: String
max 64 characters. When
this is a non-empty string,
it overrides the
LABELFONT parameter.