Xerox 850DP - Phaser Color Solid Ink Printer Manual page 46

HPGL Default Merge
Control
HPGL Default Number of
Pens
HPGL Mode
HPGL palette name
HPGL palette source
HPGL Ignore PS
Command
HPGL Force Round Line
Ends
Version 10.0
AccXES PJL Interface
HPDEFAULTMC
HPDEFAULTNP
HPGLMODE
HPGLPALETTE
HPGLPALETTESOURCE
HPIGNOREPS
HPROUNDLINEENDS
Page 41 of 160
which set/change the
Current Active Position
(CAP) - an x and y raster
location in job space.
If HPRTLNATIVEMODE is
"OFF", the interpreter
calculates the CAP
positions using the value of
the RESOLUTION variable
- this is the default. If the
setting is "ON", it uses 400
dpi (ala 8830).
R/W, Bool Establishes the default
HPGL Merge Control
setting. Range: {OFF, ON}
Default: OFF
R/W, Int Specifies the default
number of Pens for the pen
pallete. Can be overriden
by NP command, or set in
place of specifying NP in
file. Range: {1..256}
R/W, Enum Selects the HPGL
Emulation Mode. Range: {
HPGL2, HPGL758X}
Default: HPGL2
R/W, String HPGL default palette.
Range: String max 32
characters. Default: "0"
R/W, Enum Sets the source of control
for pens in HPGL files. Can
be set to JOB so that after
initialization, the palette
assigned by
HPGLPALETTE is ignored.
Otherwise, set to PRINTER
so that the palette named
by HPGLPALETTE
determines the pen
settings. Range: {JOB,
PRINTER} Default: JOB
R/W, Bool Tells the controller to
ignore the HPGL PS
command which defines
page size for HPGL/2 files.
When set to ON the PS
command is ignored. When
OFF the PS command is
used to determine page size.
Range: {ON, OFF}
Default: OFF
R/W, Bool When set to ON all vector
lines are drawn with round
ends and joints. When set to