Page Composition Job - Xerox 850DP - Phaser Color Solid Ink Printer Manual

Version 10.0
AccXES PJL Interface
@PJL COMMENT Set up params specific to file 2
@PJL SET PAPER=ANSI_E
@PJL SET MEDIATYPE=VELLUM
@PJL SET PAGESCALING=AUTO
@PJL ENTER LANGUAGE=HPGL
<Data for HPGL job 2><UEL>@PJL
@PJL COMMENT End of job delimiter
@PJL EOJ
<UEL>
Note that the end of actual job data is followed immediately with a <UEL> marker.

10.7 Page Composition Job

What follows is an example page composition job that contains two files, a TIFF file and an HPGL file.
It prints out two copies of the resulting composition. The print job's name is ExampleJob and this name
will appear in the status messages received with XESQUEUE and other PJL queries. The owner of the
job has been designated ChucksPC.
In this composition, both constituent pages are autoscaled up to a D size sheet of paper, rotated 90
degrees and placed on the canvas non-overlapping. The Tiff job is placed on the left side of the canvas
and the HPGL job on the right. The canvas is sized to ANSI E to exactly contain the two D sized pages.
<UEL>@PJL
@PJL JOB NAME="ExampleJob"
@PJL SET OWNER="ChucksPC"
@PJL COMMENT Setup the page composition canvas
@PJL SET PAGECOMPENABLE = ON
@PJL SET PAGECOMPPAPER = ANSI_E
@PJL SET PAGECOMPMEDIATYPE = PAPER
@PJL SET PAGECOMPMEDIASOURCE = AUTO
@PJL COMMENT Set up the job parameters
@PJL SET COPIES=2
@PJL SET COLLATIONENABLE=OFF
@PJL COMMENT Set up params specific to file 1
@PJL SET PAPER=ANSI_D
Page 137 of 160