Xerox 850DP - Phaser Color Solid Ink Printer Manual page 55

Label X Location
Label Y Location
Label Rotation
Label Shading Level
Label Size
Label String
Bottom Paper Margin
Left Paper Margin
Right Paper Margin
Top Paper Margin
Version 10.0
AccXES PJL Interface
LABELLOCX
LABELLOCY
LABELROTATE
LABELSHADING
LABELSIZE
LABELSTRING
MARGINBOTTOM
MARGINLEFT
MARGINRIGHT
MARGINTOP
Page 50 of 160
R/W, The X coordinate of the
Float/Enum label on the physical paper.
Can be specified in inches
or <center>, <left>, <right>.
Range: {0 - 1200, LEFT,
CENTER, RIGHT,
LEADING, TRAILING,
EXTEND}. Default:
TRAILING
R/W, The Y coordinate of the
Float/Enum label on the physical paper.
Can be specified in inches
or <center>, <left>, <right>.
Range: {0 - 1200, TOP,
CENTER, BOTTOM}. If
LABELLOCX is EXTEND
this must specify the
number of inches. Default:
BOTTOM
R/W, Int The rotation of the label
string. It may be rotated to
any orientation between 0
and 359 degrees. Range:
{0-359}. Default: 90
R/W, Int Shading level of the label.
Specified as a percentage of
colorant applied to mark
the label. 100% is black, 0%
is blank or white. Range: {0
– 100}. Default: 100
R/W, The size of the characters in
Integer the label in points. Range:
{6 - 72} Default: 18
R/W, String The ASCII label string
place on plots. Empty string
if no label used. Range:
String max 4096 characters.
Default: ""
R/W, Float The margin in inches of the
bottom of the physical page.
Range: {0 – 100} Default:
0.196" (5mm)
R/W, Float The margin in inches of the
left of the physical page.
Range: {0 – 100} Default:
0.196" (5mm)
R/W, Float The margin in inches of the
right of the physical page.
Range: {0 – 100} Default:
0.196" (5mm)
R/W, Float The margin in inches of the
top of the physical page.
Range: {0 – 100} Default:
0.196" (5mm)