Xerox 850DP - Phaser Color Solid Ink Printer Manual page 78

Version 10.0
AccXES PJL Interface
5.1.6.2.13 CCTERMSA
This specifies a termination condition for a Calcomp file. With this parameter, the user can direct the
controller to terminate file processing when either or both a 999 or 9999 search address command is
received. If the value of this parameter is NONE, then this parameter is irrelevant to determining the
end of file condition. The set of possible values includes: {999, 9999, BOTH, NONE}. The default value
is BOTH.
5.1.6.2.14 CCTERMSTARTPLOT
When ON, a start plot command in a Calcomp file directs the controller to terminate processing of the
current file. When OFF, this parameter is irrelevant to determining the end of file condition. The
default value is ON.
5.1.6.2.15 CCTERMTOF
When ON, a top of form command in a Calcomp file directs the controller to terminate processing of the
current file. When OFF, this parameter is irrelevant to determining the end of file condition. The
default value is ON.
5.1.6.2.16 CGMBKGRNDCOLOR
This parameter allows the user to override the CGM job data to enforce black markings on white
background. When the value is set to FORCEBLACKONWHITE, this override occurs. The default
value, FILECONTROL, prevents the printer from overriding job data.
5.1.6.2.17 CGMDEFAULTPAPER
Establishes the default paper size for CGM plots which do not inherently have a size. Value is similar
to Paper Size BUT must have 2 dimensions; therefore, it can not be ANY or a ROLL* size. The default
value will be ANSI_A.
5.1.6.2.18 CGMPALETTE
This string specifies the name of the palette which controls pens in the CGM data format interpreter.
CGMPALETTESOURCE determines how this palette is applied to interpreted jobs. In CGM, only the
color attribute of the pen palette is used to override the file defined LUT. Pen width and pattern
attributes are not used in the palettes when assigned to CGM. The string has a maximum of 32
characters in it, and the default value is "0".
5.1.6.2.19 CGMPALETTESOURCE
This parameter sets the source of control for pens in CGM files. Can be set to JOB so that after
initialization, the palette assigned by CGMPALETTE is ignored. Otherwise, it may be set to PRINTER
so that the palette named by CGMPALETTE determines the pen settings. The set of possible values is
{JOB, PRINTER}. The default value is JOB.
5.1.6.2.20 HPDEFAULTMC
This variable specifies the Merge Control setting for HPGL jobs. When interpreting HPGL jobs, this
setting will be used whenever the Merge Control parameter is reset to the default value, except for the
DF command (which will set the Merge Control parameter to off). This variable can be set to ON or
OFF. The default is OFF.
5.1.6.2.21 HPDEFAULTNP
Page 73 of 160