Power Supply; Optional Hardware; Intel Raid Activation Key; Intel ® Remote Management Module 3 - Intel SR1690WB - Server System - 0 MB RAM Service Manual

See the Intel
information regarding the memory sub-system.

Power Supply

TThe Power supply in SR1690WB system provides 650W at maximum. The power
supply must provide a minimum of 2.6 A of 5V standby current or the board will not boot.

Optional Hardware

®
Intel RAID Activation Key
If RAID 5 is needed, you can install the optional Intel
AXXRAKSW5. To enable RAID 5, this activation key is placed on the SATA Key
connector located at the left side of the server board. For information on how to install the
®
Intel RAID Activation Key AXXRAKSW5 accessory to enable RAID 5, see the
documentation that is included with the accessory kit.
®
Intel Remote Management Module 3
The RMM3 advanced management board serves two purposes. The first is to give the
customer the option to add a dedicated management 100-Mbit LAN interface to the
product. The second is to give additional flash space, enabling the Advanced Management
functions to support WS-MAN and CIMOM. The RMM3 comes with a third 10/100GbE
NIC that connects to the board. RMM3 management traffic can use the third NIC or NIC
1.
To install the RMM3 module, following the instruction in the RMM3 kit package, which
is purchased separately.
®
Intel Server System SR1690WB Service Guide
®
Server System S5500WB Technical Product Specification for additional
®
RAID Activation Key
23