Table of Contents
Advertisement
Intel® Server Chassis SC1400UP / Intel® Server Platform SR1425BK1-E
4.3
Control Panel Connectors
The control panel has one external I/O connectors:
•
One USB port
The following tables provide the pin-outs for each connectors.
If a monitor is connected to the front panel video connector, the rear video port on the server
board will be disabled and the front panel video will be enabled. The video source is the same
for both connectors and is switched between the two, with the control panel having priority over
the rear video. This provides for easy front accessibility to the server.
4.4
Internal Control Panel Assembly Headers
The Control Panel interface board has two internal headers:
A 50-pin header provides control and status information to/from the server board. Using a 50-pin
flat cable, the header can either be connected to a matching connector on a hot swap
backplane or, in cabled drive configurations, can be connected to a matching connector on the
baseboard.
A 10-pin header is used to provide USB support to the control panel. The round 10-pin cable is
routed from the control panel assembly to a matching connector on the baseboard.
The following tables provide the pin-outs for both types of connectors.
Revision 1.0
Table 18. External USB Connectors (J1B1)
Pin #
Description
1
PWR_FP_USB2
2
USB_DN2_FP_R
3
USB_DP2_FP_R
4
GND
5
GND
6
GND
7
GND
- 46 -
Advertisement
Table of Contents
