Table of Contents
Advertisement
System Interconnection
7.
System Interconnection
7.1
Signal Definitions
The pin-outs for the connectors referred to in this section are defined in the respective server
board Technical Product Specification.
7.2
Chassis Internal Cables
7.2.1
Control Panel Cable
A 24-conductor ribbon cable with 24-pin IDC connectors links the control panel to the SSI EEB
Revision 3.61-compliant server board.
7.2.2
USB Cable
An 8-conductor USB cable with a 10-pin server board connector and two 4-pin external USB
connectors is used to connect the front mounted USB connectors to the server board.
7.2.3
Fan Connector
The installed system fan provides a 4-pin connector that is designed to mate with a SSI (ATX*)-
3 and 4-pin compatible fan header.
7.2.4
Chassis Intrusion Cable
A 2-conductor chassis intrusion cable is included with the chassis kit. It is connected to the
control panel through a 2-pin chassis intrusion header on the control panel board.
7.3
Server Board Internal Cables
Depending on the specific server board support for these features, some or all of the following
cables may be included as part of the boxed board kit:
IDE Cable: One or two 40-pin, 80-conductor DMA33/66/100 IDE cables.
Serial Cable: One 9-conductor cable terminated in a 2x5 header at one end and a 9-pin
panel mount D sub connector on the other (ships with the server board, not the chassis).
SATA/SAS Data Cable: One or more cables with 7 contact connectors. These
connectors may feature a right angle or straight housing design.
7.4
Accessory Cables
7.5
I/O Panel Connectors
®
The Intel
Entry Server Chassis SC5299-E provides an ATX 2.2 and SSI E-bay 3.61-compliant
I/O aperture for the backside I/O. The specific panel used will be provided in the boxed server
board kit. The following are typical panel connections:
124
Intel order number D37594-005
®
Intel
Entry Server Chassis SC5299-E TPS
Revision 3.1
Hide quick links:
Advertisement
Table of Contents
