Rear Panel Components; Hard Drive And Peripheral Bays; Figure 3. Back Panel Feature Overview - Intel SR1425BK1 - Entry Server Platform Technical Specifications

Intel® Server Chassis SC1400UP / Intel® Server Platform SR1425BK1-E
1.4

Rear Panel Components

On the back of the chassis are cutouts for all external I/O connectors found on the server board.
The I/O connector locations are pre-cut, so the use of an I/O shield is not required.
A PS2 keyboard connector
B PS2 mouse connector
C Serial port A connector (DB9)
D Video connector
E NIC 2 connector (RJ45)
F USB 1 connector
1.5

Hard Drive and Peripheral Bays

The Server Chassis SC1400UP is designed to support several different hard drive and
peripheral configurations. The hard drive bay is designed to support up to three cabled SATA
or SCSI drives or hot-swappable SATA or SCSI drives. SATA and SCSI hot-swap
configurations require an orderable accessory kit which includes the necessary cables, drive
trays and applicable backplane. Reference Intel Server Chassis SR1400 for detailed accessory
information.
The slim-line peripheral bay is capable of supporting any of the following slim-line devices:
CDROM drive, DVD Drive, DVD/CDR Drive, or Floppy drive. If both a CDROM or DVD/CDR and
Floppy drive are required, on optional kit is available to convert the first 1" hard drive bay to a
floppy drive bay. The kit includes the necessary cables and slim-line floppy drive mounting tray.
Revision 1.0
G USB 2 connector
H NIC 1 connector (RJ45)
I PCI card bracket (full-height)
J Rear chassis venting holes
K Power Supply fans
L AC Power Receptacle

Figure 3. Back Panel Feature Overview

- 15 -