Sata Backplane Layout; Sata Backplane Functional Architecture; Figure 24. Sata Backplane Layout - Intel SR1425BK1 - Entry Server Platform Technical Specifications

Intel® Server Chassis SC1400UP / Intel® Server Platform SR1425BK1-E
3.4.1

SATA Backplane Layout

The SATA backplane is located on the backside of the hot-swap drive bays on the inside of the
chassis. Stand-offs on the chassis and a single thumb screw make for easy tool-less
installation. The following diagram shows the layout of major components and connectors of the
board.
Floppy Drive
Connector not used
in SR1425BK1
SATA Drive
Connectors
3.4.2

SATA Backplane Functional Architecture

This section provides a high-level description of the functionality distributed between the
architectural blocks of the SC1400UP 1U SATA HSBP. The figure below shows the functional
blocks of the SATA backplane.
Revision 1.0
Power Connector
IDE Connector not
used in SR1425BK1

Figure 24. SATA Backplane Layout

Drive Status LEDs
Figure 25. SATA Backplane Layout
100-pin connector not
used in SR1425BK1
SATA Connectors
Control Panel
Connector not used in
SR1425BK1
- 37 -