Displaying Translation Entries - Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X Configuration Manual

Displaying Translation Entries

The show ip nat translations command displays current translations that reside in
the translation table.
Simple translation entries appear with inside/outside and local/global address
information. Extended entries appear with added protocol and port numbers (or
query IDs).
Using verbose mode additionally provides the time since creation and time since
last use for each translation entry.
show ip nat translations
NOTE: Because they are not NAPT translations, port numbers for GRE translations
appear as asterisks (*).
Use to display current translations that reside in the NAT translation table.
Field descriptions
Prot Protocol (TCP, UDP, ICMP, or GRE) for this translation entry; this field
appears only for extended table entries
Inside local Inside local IP address for this translation entry; this field also
provides the port number, separated by a colon ( : ) for extended entries
Inside global Inside global IP address for this translation entry; this field
also provides the port number, separated by a colon ( : ) for extended entries
Outside global Outside global IP address for this translation entry; this field
also provides the port number, separated by a colon ( : ) for extended entries
Outside local Outside local IP address for this translation entry; this field
also provides the port number, separated by a colon ( : ) for extended entries
Time since creation Amount of time elapsed since the translation entry
appeared in the translation table
Time since last use Amount of time elapsed since the translation entry was
used
Example 1
host1# show ip nat translations
Prot Inside local
---- -------------
GRE 13.1.2.1:*
ICMP 13.1.2.2:4
TCP 13.1.2.3:20
Example 2
Inside global Outside global
-------------- --------------
20.0.0.1:* ---
20.0.0.2:4 ---
20.0.0.3:50 ---
Chapter 2: Configuring NAT
Outside local
---------------
---
---
---
91
Monitoring NAT