Verify The Connectivity Paths For Layer 3 And Layer 2 - Cisco CS-MARS-20-K9 - Security MARS 20 User Manual

Layer 2 Path and Mitigation Configuration Example
FTP:
SNMP:
SSH:
TELNET:
Click the Test Connectivity button to have the MARS discover the device.
Step 5
Click the Submit button.
Step 6

Verify the Connectivity Paths for Layer 3 and Layer 2

Once you have a session, you can view the Layer 3 and Layer 2 topology paths. There are several ways
to obtain a session.
•
Click the Incidents tab to navigate to the Incidents page. Click an Incident ID of an incident you want
Step 1
to view (in this example we use Incident number 356120290). The
User Guide for Cisco Security MARS Local Controller
19-22
For the Login ID, enter the user name and Password needed to access the switch.
–
For Config Path, enter the path of the configuration file on the FTP server.
–
For File Name, enter the switch configuration file name on the FTP server.
–
Enter its SNMP RO Community.
–
– For the Login ID, enter the user name and Password needed to access the switch.
For Enable Password, enter the password to get into Cisco enable mode.
–
Enter its SNMP RO Community.
–
For the Login ID, enter the user name and Password needed to access the switch.
–
For Enable Password, enter the password to get into Cisco enable mode.
–
Enter its SNMP RO Community.
–
– For the Login ID, enter the user name and Password needed to access the switch.
For Enable Password, enter the password to get into Cisco enable mode.
–
Enter its SNMP RO Community (mandatory).
–
To view sessions that are part of an Incident:
Chapter 19 Incident Investigation and Mitigation
Incident Details screen appears.
78-17020-01