Cisco CS-MARS-20-K9 - Security MARS 20 User Manual page 378

Mitigation
Figure 19-10
Review the enforcement device.
Step 5
Review the Recommended Policies/Commands.
Step 6
Click Push to download the recommended mitigation command to the enforcement device. The
Step 7
mitigation confirmation dialog appears, as shown in
If the Push button is gray, the mitigation command must be manually configured on the enforcement
device.
Note
User Guide for Cisco Security MARS Local Controller
19-14
Dynamic Mitigation Information
The Push button is red and functional when the 802.1X target host is present on the network,
and CS-MARS has command access to the enforcement device otherwise, it appears gray and is
not functional.
Chapter 19 Incident Investigation and Mitigation
Figure 19-11.
78-17020-01