Table of Contents
Advertisement
Viewing the MARS Backend Log Files
•
•
•
•
•
•
Viewing the MARS Backend Log Files
To view the appliance's log files or to change their levels or source, navigate to Admin > System
Maintenance > View Log Files.
Figure 24-1
You can view the appliance's back-end logs either by selecting a number of days, hours, and minutes or
you can view logs by selecting a start and ending date and time.
You can select the levels of logs that you want. Your choices are: All, Fatal, Error, Warn, Info, and
Debug.
You can also choose the source of the files that you want to view. Select either Backend or GUI.
View the Backend Log
Click the appropriate radio button:
Step 1
•
•
Select user, group, etc.
Step 2
Select the source.
Step 3
Click Submit.
Step 4
User Guide for Cisco Security MARS Local Controller
24-2
Fatal. Enables fatal logging messages. Fatal messages record very severe error events that will likely
lead the application to abort.
Error. Enables error and fatal logging messages. Error messages record error events that might still
allow the application to continue running.
Warn. Enables warning, error, and fatal logging messages. Warning messages record potentially
harmful situations.
Info. Enables informational, warning, error, and fatal logging messages. Informational messages
highlight the progress of the application at coarse-grained level.
Debug. Enables debug, informational, warning, error, and fatal logging messages. Debug messages
record fine-grained informational events that are most useful to debug an application.
Trace. Enables trace, debug, information, warning, error, and fatal logging messages. Trace
messages record finer-grained informational events than debug messages.
Backend log viewing options
Last: The present time minus the number of days, hours, and minutes entered.
Start/End: Absolute literal time ranges defined by the date to the minute.
Chapter 24
System Maintenance
78-17020-01
Advertisement
Table of Contents
Troubleshooting
