Configure Ssh Access For Devices In Mars; Configure Ftp Access For Devices In Mars; Bootstrap Summary Table - Cisco CS-MARS-20-K9 - Security MARS 20 User Manual

Security mars local controller
Table of Contents

Advertisement

Bootstrap Summary Table

Configure SSH Access for Devices in MARS

This procedure assumes you are defining a reporting device or mitigation device and that you were
referred to this procedure after selecting SSH in the Access Type list.
If you selected SSH as the access type, follow these steps:
Step 1
From the list box to the right of the Access Type list, select 3DES, DES, or BlowFish as the encryption
cipher for SSH sessions between the MARS Appliance and the reporting device.
Step 2
In the Login field, enter the username of the administrative account to use when accessing the reporting
device.
In the Password field, enter the password associated with the username specified in the Login field.
Step 3
Step 4
If this device supports an enable mode, enter that password in the Enable Password field.

Configure FTP Access for Devices in MARS

This procedure assumes you are defining a reporting device or mitigation device and that you were
referred to this procedure after selecting FTP in the Access Type list.
If you selected FTP as the access type, follow these steps:
In the Login field, enter the username of the FTP server account to use when accessing the configuration
Step 1
file of the reporting device.
In the Password field, enter the password associated with the username specified in the Login field.
Step 2
Step 3
In the Config Path field, enter the path to the reporting device's configuration file residing on the FTP
server.
This path begins at the root of the FTP server's published folder, not at the root directory of server.
Step 4
In the File Name field, enter the name of the reporting device's configuration file residing on the FTP
server.
If you select FTP, you cannot enter an enable password.
Note
Bootstrap Summary Table
Table 2-3
It also provides links to any required agent downloads and to detailed configuration information.
User Guide for Cisco Security MARS Local Controller
2-12
summaries the settings that you must configure for reporting devices and mitigation devices.
Chapter 2
Reporting and Mitigation Devices Overview
78-17020-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mars 20Mars 50Mars 100Mars 200

Table of Contents