Enabling The Required Snmp Oids For Resource Monitoring - Cisco CS-MARS-20-K9 - Security MARS 20 User Manual

Data Enabling Features
It also detects anomalous resource utilization if the consumption is significantly higher than the hourly
average.
The following resource usage data reports are available:
•
•
•
•
•
•
•
You can define custom rules, reports, and queries about resource usage based on the following events:
•
•
•
•
•
•
•
•
There is also is pre-defined resource utilization inspection rule:
•
•
•

Enabling the Required SNMP OIDs for Resource Monitoring

Table 2-5
User Guide for Cisco Security MARS Local Controller
2-42
Resource Utilization: Bandwidth: Inbound - Top Interfaces
Resource Utilization: Bandwidth: Outbound - Top Interfaces
Resource Utilization: CPU - Top Devices
Resource Utilization: Concurrent Connections - Top Devices
Resource Utilization: Errors: Inbound - Top Interfaces
Resource Utilization: Errors: Outbound - Top Interfaces
Resource Utilization: Memory - Top Devices
CPU Utilization Higher Than 50%
CPU Utilization Higher Than 75%
CPU Utilization Higher Than 90%
CPU Utilization Abnormally High
Memory Utilization Higher Than 50%
Memory Utilization Higher Than 75%
Memory Utilization Higher Than 90%
Memory Utilization Abnormally High
System Rule: DoS: Network Device - Success Likely
System Rule: DoS: Network - Success Likely
System Rule: Resource Issue: Network Device
lists the OIDs to enable, on a per device basis, for the supported model and versions.
Chapter 2 Reporting and Mitigation Devices Overview
78-17020-01