Add The Netscreen Device To Mars - Cisco CS-MARS-20-K9 - Security MARS 20 User Manual

NetScreen ScreenOS Devices
Verify that all the Syslog event severity levels that need to be sent to MARS are configured. Verify which
Step 19
Syslog severity levels that are enabled by selecting Configuration > Report Settings > Log Settings.

Add the NetScreen Device to MARS

Select Admin > System Setup > Security and Monitor Devices > Add.
Step 1
Select the appropriate version of NetScreen ScreenOS from the Device Type list.
Step 2
Enter the name of the device in the Device Name field.
Step 3
MARS maps this name to the reporting IP address. This name is used in topology maps, queries, and in
the Security and Monitoring Device list. For devices that support the discovery operation, such as routers
and firewalls, MARS renames this field's value to match the name discovered in the device
configuration, which typically uses the hostname.domain format. For devices that cannot be discovered,
such as Windows and Linux hosts and host applications, MARS uses the provided value.
(Optional) To enable MARS to discover settings from this device, enter the administrative IP address in
Step 4
the Access IP field.
To learn more about the access IP address, its role, and dependencies, see
Reporting IP, and Interface Settings, page
User Guide for Cisco Security MARS Local Controller
4-20
2-8.
Chapter 4 Configuring Firewall Devices
Understanding Access IP,
78-17020-01