Cisco CS-MARS-20-K9 - Security MARS 20 User Manual page 146

NetScreen ScreenOS Devices
Configure the Syslog information by selecting Configure > Report Settings > Syslog.
Step 10
Verify that the Enable Syslog Messages and Include Traffic Log boxes are checked.
Step 11
Enter the IP address of the MARS Appliance that will listen for events from this device
Step 12
Verify that the default syslog port number of 514 is selected.
Step 13
Select the AUTH/SEC for Security Facility and LOCAL0 for Facility.
Step 14
For NetScreen 5.0, select the Event Log in addition to Traffic Log.
Step 15
Step 16 Click Apply.
User Guide for Cisco Security MARS Local Controller
4-18
Chapter 4 Configuring Firewall Devices
78-17020-01