Mitigation
Figure 19-12
Click All to display the entire dynamic information for the specified IP address, as shown in
Step 6
Figure
Figure 19-13
Click the Push button if available or mitigate from the device. If you select the push button, a
Step 7
confirmation screen appears.
To mitigate a device of Access Type SNMP you must have the SNMP Read/Write Community String.
Note
Click the Yes button to confirm the mitigation command and have it take effect.
User Guide for Cisco Security MARS Local Controller
19-16
Dynamic Information—Current Connection Status
19-13.
Dynamic Information History of a Specified IP Address
Chapter 19
Incident Investigation and Mitigation
78-17020-01