Cisco CS-MARS-20-K9 - Security MARS 20 User Manual page 137

Chapter 4 Configuring Firewall Devices
If you are adding a PIX security appliance or a Cisco ASA, an Select Admin > System Setup >
•
Security and Monitor Devices > Add.
Select one of the following options from the Device Type list.
Step 2
Cisco PIX 6.0
•
Cisco PIX 6.1
•
Cisco PIX 6.2
•
Cisco PIX 6.3
•
• Cisco PIX 7.0
• Cisco ASA 7.0
Cisco FWSM 1.1
•
Cisco FWSM 2.2
•
Cisco FWSM 2.3
•
Cisco FWSM 3.1
•
Enter the name of the firewall device in the Device Name field.
Step 3
MARS maps this name to the reporting IP address. This name is used in topology maps, queries, and in
the Security and Monitoring Device list. For devices that support the discovery operation, such as routers
and firewalls, MARS renames this field's value to match the name discovered in the device
configuration, which typically uses the hostname.domain format. For devices that cannot be discovered,
such as Windows and Linux hosts and host applications, MARS uses the provided value.
(Optional) To enable MARS to discover settings from this firewall device, enter the administrative IP
Step 4
address in the Access IP field.
If the device is running Cisco ASA, PIX 7.0, or FWSM, this address corresponds to IP address from
Note
which the syslog messages of the admin context are sent.
To learn more about the access IP address, its role, and dependencies, see
Reporting IP, and Interface Settings, page
78-17020-01
Cisco Firewall Devices (PIX, ASA, and FWSM)
2-8.
User Guide for Cisco Security MARS Local Controller
Understanding Access IP,
4-9