Table of Contents
Advertisement
Chapter 9
Configuring Vulnerability Assessment Devices
Step 3
Enter the name of the Qualys device in the Device Name field.
This name is used to identify the Qualys device uniquely within MARS. It is used in reports and query
results to identify this device.
The IP address field is read only. The value is also fixed at 165.193.18.12, which is significant because
you can only define one schedule for pulling all report queries defined as Qualys devices on the
Local Controller. However, you can define unique schedules across different Local Controllers. For
more information, see
Enter the URL that identifies the device and report type in the URL field.
Step 4
The URL provides the following information:
•
Server. Identifies the server from which the report should be pulled. This value can be specified as
a hostname or IP address that identifies the primary Qualys server.
•
Report type. Real-time vs. Last Saved. The default value.
–
Note
–
Step 5
Enter the username of the account that MARS will use to access the Qualys device in the Login field.
Step 6
Enter the password that corresponds to the account identified in
78-17020-01
Scheduling Topology Updates, page
Real-time Report. qualysapi.qualys.com/msp/scan.php?ip=[addresses]
The addresses attribute specifies the target IP addresses for the scan request.
IP addresses may be entered as multiple IP addresses, IP ranges, or a combination of the two.
Multiple IP addresses must be comma separated, as shown below:
123.123.123.1,123.123.123.4,123.123.123.5
An IP address range specifies a start and end IP address separated by a dash (-), as shown below:
123.123.123.1-123.123.123.8
A combination of IP addresses and IP ranges may be specified. Multiple entries must be comma
separated, as shown below:
123.123.123.1-123.123.123.5,194.90.90.3,194.90.90.9
You must use a Scanner Appliance to scan private IP addresses on your internal network.
Last Saved Report. qualysapi.qualys.com/msp/scan_report_list.php?last=yes
2-39.
Step 5
in the Password field.
User Guide for Cisco Security MARS Local Controller
Qualys QualysGuard Devices
9-7
Advertisement
Table of Contents
Troubleshooting
