Cisco CS-MARS-20-K9 - Security MARS 20 User Manual page 302

Install and Configure the PN Log Agent
Download the PN Log Agent and install it on the server running Cisco Secure ACS or on the remote
Step 1
logging host to which the Cisco Secure ACS Solution Engine is publishing its logs.
If installing on a remote logging host, you must have configured the Cisco Secure ACS Remote Agent
Note
for Windows on the target remote logging host.
For instructions on installing and configuring the remote agent, see
Guide for Cisco Secure ACS Remote
Select Start > All Programs > Protego Networks > PNLogAgent > Pn Log Agent
Step 2
Click Edit > PN-MARS Config.
Step 3
Result: The PN Log Agent Configuration dialog box appears.
In the MARS IP Address field, enter the address of the MARS Appliance, and click OK.
Step 4
Select Edit > Log File Config > Add.
Step 5
Step 6 From the Edit pull down menu select Add.
Result: The Add/Edit File Details dialog box appears.
Step 7 From the Application Name list, select the Cisco ACS-Failed Attempts.
Click on the ... button to select the appropriate log where all Cisco Secure ACS logs are stored. In this
Step 8
example after selecting Failed Attempts application, be sure to select the matching log file, Failed
Attempts active log.
Result: The Open dialog box appears.
User Guide for Cisco Security MARS Local Controller
14-8
Agents.
Chapter 14 Configuring AAA Devices
Installation and Configuration
78-17020-01