Cisco CS-MARS-20-K9 - Security MARS 20 User Manual page 307

Chapter 14 Configuring AAA Devices
In the Select Application box, select Cisco ACS 3.x, and then click Add.
Step 8
Result: The Cisco ACS 3.x Windows Requirements page appears, explaining that you must have
installed an agent on the server as described in
The Cisco ACS 3.x option supports both Cisco Secure ACS 3.x and Cisco Secure ACS 4.0. No explicit
Note
4.0 option exists for Cisco Secure ACS.
Step 9 Click Submit to add this application to the host.
Result: Cisco ACS 3.x appears in the Device Type list.
Click the Vulnerability Assessment Info link to define the host information that MARS uses to
Step 10
determine false positive attacks against this host. Continue with
Information, page
Step 11 Click Done to save the changes.
Result: The new host appears in the Security and Monitoring Information list.
To activate the device, click Activate.
Step 12
78-17020-01
10-12.
Add and Configure the Cisco ACS Device in MARS
Install and Configure the PN Log Agent, page
Define Vulnerability Assessment
User Guide for Cisco Security MARS Local Controller
14-7.
14-13