Post-Installation Tasks - Novell IDENTITY ASSURANCE SOLUTION 3.0.2 Installation Manual

Hide thumbs Also See for IDENTITY ASSURANCE SOLUTION 3.0.2:
Table of Contents

Advertisement

To configure the driver, see
Configuring the Connected System (Remote Loader)
1 Launch the Remote Loader Console.
2 Click Add to add a remote driver.
3 Specify a description for the remote driver.
4 Select com.novell.nds.dirxml.driver.hwpacs.HWPACSDriver in the driver drop-down list.
This is the Physical Access Control System (PACS) driver. If the driver is not listed, it means
the driver has not been installed. You must first install the driver. See
page
28.
5 Specify a filename and location for the Remote Loader configuration file.
6 Select All for the Remote Loader service to listen for communication on all IP address for the
ActivIdentity server.
6a Leave the connection port at the default of 8090.
6b Leave the command port at the default of 8000.
7 Specify the Remote Loader password.
8 Specify the driver object password.
9 Select Use an SSL Connection.
9a Browse to and select a trusted root certificate.
See
Providing for Secure Data Transfer (http://www.novell.com/documentation/idm35/
admin/data/bs35pi6.html#bs35pi6)
This trusted root certificate enables the remote loader to establish an SSL connection with
the Identity Vault server.
10 Set the trace level to zero.
Increase this only during troubleshooting of the driver.
11 Select Establish a Remote Loader service for this driver instance.
12 Click OK to save the information.
To configure the driver, see

3.6 Post-Installation Tasks

After installation, you need to enable the iManager plug-ins:
1 Launch iManager.
2 Click the Configure icon
3 Install the NESCM plug-ins:
3a Click Module to select all available modules.
3b Click Install.
4 Close iManager.
5 Restart Tomcat by either rebooting the server or doing the following:
5a Click Start > Settings > Control Panel.
Section 4.1.6, "Configuring the PACS Integration Driver," on page
for information on how to create a trusted root file.
Section 4.1.6, "Configuring the PACS Integration Driver," on page
.
"Installing the Driver" on
Installing Identity Assurance Solution
41.
41.
29

Advertisement

Table of Contents
loading

Table of Contents