Creating The Installation Cd From The Novell Zenworks Network Access Control Download - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - INSTALLATION GUIDE 09-22-2008 Installation Manual

4 A pop-up window appears instructing you to select a directory in which to save the file.
Navigate to a location that you will remember when it is time to create the install CD. Click
Save.
5 The download window appears, showing the status of the download process. This download
can take a lot of time, depending on your connection speed.
6 After you download the file (ISO image), you need to create a CD (see
the Installation CD from the Novell ZENworks Network Access Control Download," on
page 32), and then you can use that CD to install the Novell ZENworks Network Access
Control software (see
on page
NOTE: Downloading an ISO image file and creating an installation CD is not the same process as
just copying a file to a CD.
3.1.2 Creating the Installation CD from the Novell ZENworks
Network Access Control Download
TIP: If you already have a Novell ZENworks Network Access Control installation CD, go to
Section 3.1.3, "Installing Novell ZENworks Network Access Control," on page
You must have a CD to install Novell ZENworks Network Access Control. This section describes
how to create one from the downloaded ISO image.
To create the Novell ZENworks Network Access Control installation CD:
1 For Windows:
1a Most current CD-burning software supports creating CDs from ISO images. Open the ISO
file with your CD-burning software. If it recognizes the ISO file, proceed with the CD-
burning process.
or
1b Right-click on the ISO file and choose Open with>>Choose program and select your CD-
burning software. After your CD program launches, create the CD using the typical
procedures.
TIP: A Free CD-burning application you can try is
www.cdburnerxp.se).
2 For Linux:
Most Linux systems include the cdrecord command; however, cdrecord syntax varies
depending on the specific distribution. Consult your documentation for the correct syntax for
your version.
For example:
cdrecord -v speed=8 dev=0,0,0 /tmp/imagefile.iso
Where 8 is the speed of your burner, and /tmp/imagefile.iso is the path and file name
of the ISO file you wish to copy.
32 Novell ZENworks Network Access Control Installation Guide
Section 3.1.3, "Installing Novell ZENworks Network Access Control,"
33).
Section 3.1.2, "Creating
33.
CDBurnerXP Pro (http://