Recalling The Last Bypass Scheme; Programming The 'Follow-Me' Telephone No; Setting The User Codes; Setting The Voice Options - Visonic POWERMAX User Manual

You can now click <NEXT> repeatedly to review all
bypassed zones, in ascending numerical order. When
done, clicking <HOME> will get you back to SHOW
BYPASS and clicking <AWAY> will get you back to <OK>
TO EXIT.

7.5 Recalling the Last Bypass Scheme

Arming the alarm system with several zones in the
bypassed state is in fact "partial arming". An identical
partial arming may be repeated by recalling the last
bypassing scheme (that was suspended and memorized
upon disarming the system).
Having entered your user code successfully (see Para.
7.2), the display will read:
S E T B Y P A S S
Click <NEXT> twice to change the display into:
R E C A L L B Y P A S S
At this point proceed as follows:
Action
< O K > T O R E C A L L
R E C A L L B Y P A S S
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
<AWAY>. When <OK> TO EXIT is displayed - click <OK>.
7.6 Programming the "Follow-me"
Telephone Number
Having entered your Master Code successfully (see Para.
7.2), the display will read:
S E T P H O N E N U M B E R
Please note that the 1
numbers are programmed by the installer. You are allowed
th
to program the 4 ("follow-me") number as follows:
Action
[Tel. No.]
X X X X X X X X X
X X X X X X X X X
S E T P H O N E N U M B E R
You may now switch to any other item on the USER
SETTINGS menu or quit programming by clicking <NEXT>
until <OK> TO EXIT is displayed and then clicking <OK>.

7.7 Setting the User Codes

Having entered your Master Code successfully (see Para.
7.2), click <NEXT> until the display reads:
S E T U S E R C O D E S
User Code 1 replaces the factory default master code, and
should be assigned to the master user of the system. This
code can not be erased.
User Codes 2, 3 and 4 can be assigned to additional
users - family members, co-workers etc.
Codes 5 through 8 are assigned to "Latchkey Users" (see
Para. 2.9 for explanation of the latchkey mode).
CAUTION! Code "0000" is not valid! Do not use it.
Note: The duress code set by the installer (2580 by
default) cannot be selected as a normal user code. Any
attempt to program it will be rejected by the PowerMax.
To program the codes, proceed as follows:
DE5450U
Resultant Display
st nd rd
, 2 and 3 private telephone
Resultant Display
Action
[4-digit
code] (e.g. 6854)
Continue the same way up to Code 8.
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
<AWAY>. When <OK> TO EXIT is displayed - click <OK>.
Sound

7.8 Setting the Voice Options

Remember: Voice prompts are heard over the built-in
☺
loudspeaker subject to two conditions:
- The voice option is enabled as shown below
- The loudspeaker is enabled by pressing the "7" key
(see Para. 3.3)
Here you may select one of two options:
• Enable prompts: Voice announcements
• Disable prompts: No voice announcements
The presently programmed option will be shown, with a
dark selection box ( ) at the far right of the display. You
may view the other option (that does not have a dark box
at the far right) by clicking <NEXT>. A dark box will appear
if you click <OK> while the other option is displayed.
To set the voice option, proceed as follows:
Having entered your Master Code successfully (see Para.
Sound
7.2), click the <NEXT> button until the display reads:
S E T V O I C E O P T I O N
From here, proceed as follows:
Action
☺
If not satisfied -
If satisfied -
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
<AWAY>. When <OK> TO EXIT is displayed - click <OK>.
Note: When using the Model MCT-234 keyfob with the
PowerMax, the voice prompts must be enabled.

7.9 Setting the Clock

Having entered your Master Code successfully (see Para.
7.2), click <NEXT> until the display reads:
T I M E
Resultant Display
u s e r c o d e 1 _ _ _ _
0
u s e r c o d e 1:
u s e r c o d e 1 : 6 8 5
u s e r c o d e 1 : 6 8 5 4
u s e r c o d e 2
u s e r c o d e 8 : 5 5 3 7
S E T U S E R C O D E S
Resultant Display
e n a b l e p r o m p t s
(if this is the current option)
d i s a b l e p r o m p t s
d i s a b l e p r o m p t s
S E T V O I C E O P T I O N
H H : M M A
Sound
0 0 0
4
☺
☺
Sound
☺
17