Table of Contents
Advertisement
1
Overview
Table 5 Power Supply Status LEDs
LED
Fault
Over Temp
PWR OK
Fan Unit
The IP560 fan is a single unit made up of four individual fans to provide the air flow required to
maintain a proper operating temperature. The fan unit can provide proper airflow for a short time
even if an individual fan fails.
Figure 8 Fan Unit
Caution
If an individual fan fails, replace the fan unit as soon as possible. For information about
how to replace a failed fan unit, see
The system status LEDs on the front panel of the appliance show the status of the fan unit. For
more information about the system status LEDs, see
28
LED status
Meaning
Red
Power supply has a voltage problem
and power was turned off.
or
One power supply in a redundant
system is not turned on.
Yellow
Power supply has an internal
temperature problem. All power to the
unit is turned off. After the internal
temperature returns to normal, power
will be turned back on.
Green
Power is on and the power supply is
functioning properly.
"Replacing a Fan Unit"
00362
on page 103.
"System Status LEDs"
IP560 Security Platform Installation Guide
on page 25.
Advertisement
Table of Contents
Troubleshooting
