About This Guide; In This Guide - Nokia IP560 - Hard Disk Drive Based Installation Manual

About this Guide

This manual provides information for the installation and use of the Nokia IP560 security
platforms. Installation and maintenance should be performed by experienced technicians or
Nokia-approved service providers only.
This preface provides the following information:

In this Guide

Conventions this Guide Uses
Related Documentation
In this Guide
This guide is organized into the following chapters and appendixes:
Chapter 1, "Overview"
Chapter 2, "Installing the Nokia IP560 Appliance"
appliance.
Chapter 3, "Performing the Initial Configuration"
Nokia IP560 security platform to a network and to a power source and how to make the
security platform available on the network.
Chapter 4, "Installing and Replacing Network Interface Cards"
monitor, and replace network interface cards (NICs).
Chapter 5, "About IP560 Appliance Network Interface Cards"
and use each of the supported NICs.
Chapter 6, "Installing, Using, and Replacing ADP Services Modules"
Accelerated Data Path (ADP) services modules with your IP560 appliance.
Chapter 7, "Installing and Replacing Components Other than Network Interface Cards
(NICs) and Accelerated Data Path (ADP) Services Modules"
replace memory, hard disk drives, the fan unit, power supply, battery, compact flash memory
card, PC card, and the Nokia encryption accelerator card.
Chapter 8, "Troubleshooting"
solutions to these problems.
Appendix A, "Technical Specifications"
characteristics.
IP560 Security Platform Installation Guide
presents a general overview of the Nokia IP560 security platform.
discusses problems you might encounter and proposes
provides technical specifications such as interface
describes how to rack-mount the
describes how to physically connect the
describes how to install,
describes how to connect to
describes how to use
describes how to install or
13