Nokia IP560 - Hard Disk Drive Based Installation Manual page 65

For information about how to use Network Voyager or the CLI, see the Nokia Network
Voyager Reference Guide or Nokia CLI Reference Guide for the version of Nokia IPSO you
are using.
4. Turn off the power to the IP560 appliance.
5. Loosen the two front panel retaining screws.
6. Slide the chassis tray assembly forward, pressing the release tab on the right side of the
assembly, and, taking care not to damage any internal components, completely remove the
chassis to expose the motherboard.
7. Place the chassis tray assembly on a table top.
IP560 Security Platform Installation Guide
SLOT 1 SLOT 2
Chassis tray assembly retaining
screws
SL OT
1
SL OT
2
SL OT
3
1
3 2 SL OT
4 4
Installing and Replacing ADP Modules
IP560
SLOT 3 SLOT 4
1
2
3
4
00520
00354
65