Managing The Nokia Ip560 Security Platform - Nokia IP560 - Hard Disk Drive Based Installation Manual

Security platform
Hide thumbs Also See for IP560 - Hard Disk Drive Based:
Table of Contents

Advertisement

1
Overview
1 GB system RAM.
AC power supply.
Fan unit.
Encryption acceleration card to further enhance VPN performance.
The front panel of the IP560 security platform contains:
Four PMC slots for network interfaces cards (NICs) and Accelerated Data Path (ADP)
services modules, including:
A console port
An auxiliary port
Front-panel reset button
Note
Any slot can be used for an Ethernet NIC. The PCMCIA PC card carrier that comes
preinstalled in slot 3 is removable; slot 3 can accept a Nokia-approved NIC. For Accelerated
Data Path (ADP) services modules usage information, see
Replacing ADP Services Modules."
The network interfaces provide exceptional data forwarding and monitoring performance when
used with Nokia and partner applications. The network interfaces are designated for
management, monitoring, and high-availability traffic.
For flash-based appliances, you can purchase optional 2.5-inch hard-disk drives to use for
logging.
The IP560 security platform is designed to meet other mid- to high-end availability
requirements, including port density for connections to redundant internal, external, DMZ, and
management networks. In addition, the IP560 security platform provides N + 1 cooling.
As a network device, the IP560 security platform supports a comprehensive suite of IP-routing
functions and protocols.
The integrated router functionality eliminates the need for separate intranet and access routers in
security applications.

Managing the Nokia IP560 Security Platform

You can manage the IP560 security platform by using the following interfaces:
Nokia Network Voyager—an SSL-secured, Web-based element management interface to
Nokia IP security platforms. Network Voyager is preinstalled on the IP560 security platform
and enabled through the IPSO operating system. With Network Voyager, you can manage,
monitor, and configure the IP560 security platform from any authorized location within the
network by using a standard Web browser. Use one of the four Ethernet ports to access the
Network Voyager interface.
20
a single-slot PCMCIA PMC option slot in slot 3
a four-port Ethernet 10/100/1000 interface in slot 4
Chapter 6, "Installing, Using, and
IP560 Security Platform Installation Guide

Advertisement

Table of Contents
loading

Table of Contents