Figure 5 Nokia Ip560 Security Platform System Status Leds; Table 4 System Status Leds - Nokia IP560 - Hard Disk Drive Based Installation Manual

1
Overview

Figure 5 Nokia IP560 Security Platform System Status LEDs

Table 4

Table 4 System Status LEDs

Status Indicator
Solid blue
Solid yellow
Blinking yellow
Solid red
Blinking green
The location and definition of the status LEDs for the installed network interface cards (NICs) is
described in
The location and definition of the status LEDs for Accelerated Data Path (ADP) services
modules is described in
Note
The symbols in
26
Warning
(yellow)
System OK
(green)
SLOT 2
shows the system status LEDs and describes their meaning.
Definition
Power on
Appliance is experiencing an
internal voltage problem.
Appliance is experiencing a
temperature problem.
One or more fans are not
operating properly.
Power supply over temperature
fault.
System activity indicator
Chapter 5, "About IP560 Appliance Network Interface Cards."
Chapter 6, "Installing, Using, and Replacing ADP Services Modules."
Table 4 are visible only if there is an alarm condition, as specified.
Power indicator
Fault (red)
(blue)
SLOT 3
Symbol
IP560 Security Platform Installation Guide
SLOT 4
1
2
3
4
!
!
00351