Model Select - FUTABA 3PJ Super Instruction Manual

Use this function to call a new model number, or to change a set model number, to set
new model data.
The T3PJ SUPER transmitter can store the model data for eight R/C cars. The DP-
16K Data Pac (Option) can store model data for eight more models.
The model numbers are 01 to 08 at the transmitter and 09 to 16 at the Data Pac. When
the Data Pac is not installed, model numbers 09 to 16 are not displayed.
1. Access the DIRECT mode by
pressing the DIRECT key.
2. Call the Model Select function
set-up screen by pressing the
MSEL key.
3. Select the model number you
plan to call with the + and -
keys.
4. At the end of adjustment,
press the DIRECT key twice.
(Returns to the initial screen.)
Calling model memories of different modulation modes (PCM->PPM or PPM->PCM)
After the new model is called, signals are still output in the old model modulation
mode until the transmitter power is turned off. Before using the new modulation
mode, turn the power off and on.
DP-16K Data Pac (Option)
For the transmitter to use the Data Pac, it must be initialized when the power is turned
on for the first time. If "CAM-INI?" is displayed on the screen when the power is
turned on, press the + key. This automatically initializes the transmitter. This opera-
tion is unnecessary thereafter.
Inserting and removing the Data Pac
Before inserting and removing the Data Pac, turn off the power switch. If the power is
turned off when a model number (09 to 16) in the Data Pac is selected and is turned
back on after the Data Pac has been removed, "MSELERR" will be displayed and
model No. 1 will be forcibly selected.
44

Model Select

DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
- 2 times
M.SEL
+
RESET
-
CUSTOM
M.SEL
+
RESET
-
CUSTOM
Blink
(Model number)
M.SEL
+
RESET
-
Setting range; 01~08(16)
CUSTOM
M.SEL
+
RESET
-
CUSTOM
(Model name)