Throttle Atv - FUTABA 3PJ Super Instruction Manual

Use this function when adjusting the throttle high and low side linkages.
Warning
Be sure that throttle operation does not apply unreasonable
force to the servo horn.
Unreasonable force applied to the servo horn may result in damage to the servo
and loss of control.
First, set ATL dial (initial setting: GD2) for to the
maximum servo throw position (100%).
1. Access the DIRECT mode by
pressing the DIRECT key.
2. Call the ATV function set-up
screen by pressing the ATV
key.
3. Call the Throttle ATV function
set-up screen by pressing the
SELECT key.
4. To adjust the throttle forward
side, pull the throttle trigger
all the way to the forward side
and adjust the percentage
with the + and - keys. How-
ever, when using an
FET amp, set the per-
centage to 100%.

Throttle ATV

DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
- Return to the initial value (100%) by pressing the + and - keys
simultaneously for about one second.
100%
M.SEL
+
RESET
-
CUSTOM
M.SEL
+
RESET
-
CUSTOM
Blink
M.SEL
+
RESET
-
CUSTOM
Blink
Setting range; 0~120%
M.SEL
+
RESET
-
CUSTOM
35