FUTABA 3PJ Super Instruction Manual page 103

DSC cord
When the TPJ SUPER transmitter and FP-R113iP or FP-R113F receiver are con-
nected with the DSC cord, the servos can be operated without transmitting a signal.
(DSC function)
Part name
DSC cord for 3PJ SUPER
Connection
Receiver
Connected to B/C
To receiver battery
Receiver switch
To transmitter DSC jack
DSC cord
Receiver
To receiver battery
Receiver switch
To transmitter DSC jack
DSC cord
Body rest
If you are going to use the transmitter for a long time, the strain on your arms can be
reduced and stable operation can be performed by using this body rest.
Part name
3PJ Body Rest
1
To servos
2
3
B/C
Y-Adapter
To servos
1
2
3
B/C
Connect to CH3
Connect to B/C
- When used fully up to channel 3, the
Y-Adapter must be purchased sepa-
rately.
- When channel 3 is not used, connect
the receiver switch to CH3 and con-
nect the DSC cord to the B/C terminal.
103