FUTABA 3PJ Super Instruction Manual page 60

8. At the end of adjustment.
press the UP key 5 times, or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
Presetting by switch (engine cut, etc.)
1. Select throttle preset (THPR) at the push-button
switch (PSH) with the function select switch func-
tion. (Page 89)
2. Press the DOWN key five
times at the initial screen. The
start function setup screen is
called.
When the push-button switch
was pressed, the display
changes from OFF to ON.
3. (Preset position setting)
Press the SELECT key two
times. The display switches
to the preset position setup
screen.
4. Set the preset postion with
the + and - keys.
5. At the end of adjustment,
press the UP key five times,
or press the DIRECT key two
times. (Return to the initial
screen)
Servo Throw
The throttle servo operating position (preset position) set by this setting is unrelated
to the setting of other functions. Maximum to minimum servo travel can be set. How-
ever, the reverse function setting is enabled.
60
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
-5 times
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
-5 times
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
-2 times
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
-5 times
Blink
Blink
Blink
Setting range: B100~0~F100%
"B": Brake (back) side
"F": Forward side
- Return to the initial value (0%) by
pressing the + and - keys simulta-
neously for about one second.