FUTABA 3PJ Super Instruction Manual page 16

Digital Trim Operation
(Initial settings: DT1: Steering trim, DT2: Throttle trim, DT3: -------)
Operating by the lever: Push the lever to the left or right (up or down).
Operating by push button switch: Press the push button switch in the desired direc-
tion.
The current position is displayed on the LCD screen.
DT2
DT1
Trim Operation
With the center trim feature, trim adjustments have no effect on the maximum servo
travel. This prevents the linkages from binding when adjustments are made.
Grip dial operation
(Initial settings: GD1=Steering D/R, GD2=ATL)
Operate the dials by turning them. The current set value is displayed on the LCD
screen.
GD1
GD2
16
DT3
Lever
Push button switch
- Each step is indicated by a tone.
- When the trim exceeds the maximum trim adjustment
range, the tone will change pitch and the lever will not
move any farther.
- Return to the neutral position (center) by pressing both
the push button switches simultaneously for about one
second.
Steering D/R display
- A click sound is made at each step.
- When the maximum position is reached at each side, the
tone of the click changes. Thereafter, the set value does
not change.
Steering trim display
Throttle trim display
ATL display