Error Displays - FUTABA 3PJ Super Instruction Manual

Low Battery Alarm
If the transmitter battery voltage drops to 8.5V or less, an audible alarm will sand and
"LOW BATT" will be displayed on the LCD screen.
LCD screen:
Audible alarm:
Continuous tone.
Backup Error
If the data is lost for an unknown reason, an audible alarm will sound and "BU-
ERROR" will be displayed on the LCD screen.
LCD screen:
Audible alarm:
Tone will sound (9 times), then
repeat.
Model Select Error
If the power is turned back on in the state in which a model No. in the Data Pac was
called and the Data Pac is not installed, an audible alarm will sound and
"MSELERR" will be displayed on the LCD for several seconds. Then model No. 1
will be forcibly called.

Error Displays

Blink
Blink
Warning
When a low battery alarm is gener-
ated, cease operation immediately
and retrieve the model.
If the battery goes dead while in operation, you will
lose control.
Warning
When a backup error is generated,
immediately stop using the system
and request repair from the Futaba
Service Center.
If you continue to use the system, the transmitter
may malfunction and cause loss of control.
105