FUTABA 3PJ Super Instruction Manual page 90

1. Call the Set-Up mode screen
by pressing the UP and
DOWN keys simultaneously
at the initial screen.
2. Call the Function Select
Switch function screen by
pressing the UP or DOWN
keys in function map order.
3. (Selection of switch you want
to set)
Select PSH, SLD or custom
key you want to set by press-
ing the SELECT key.
4. Select the function you want
to set with the + or - key.
5. At the end of adjustment,
press the UP and DOWN
keys simultaneously. Or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
Switch screen display
For functions that can use the push-button switch (PSH) or slide switch (SLD), the
following symbols are displayed on the setup screen of the relavent function.
(A.B.S. function example)
*For the A.B.S function, both switches can be set.
When the A.B.S. function is allocated to the push-button switch or slide switch with
the function select switch function, the screen switch display changes (becomes
larger) and the setting state of the switch can be checked. The figure at the right
shows the case when the push-button switch was set.
90
DIRECT
SELECT
TH.EXP
DIRECT
SELECT
TH.EXP
DIRECT
SELECT
TH.EXP
DIRECT
SELECT
TH.EXP
DIRECT
SELECT
TH.EXP
[If this is displayed, SLD can be set]
[If this is displayed, PSH can be set]
ST.EXP M.SEL
+
UP
SETUP RESET
-
DOWN
ATV CUSTOM
ST.EXP M.SEL
+
UP
SETUP RESET
-
DOWN
ATV CUSTOM
PSH: Push switch
ST.EXP M.SEL
UP +
SLD: Slide switch
SETUP RESET
-
DOWN
ATV CUSTOM
CTM: Custom key
ST.EXP M.SEL
UP +
SETUP RESET
-
DOWN
ATV CUSTOM
ST.EXP M.SEL
UP +
SETUP RESET
-
DOWN
ATV CUSTOM
[Display is enlarged]