FUTABA 3PJ Super Instruction Manual page 106

LCD screen:
Data Pac Error
If data transfer with the Data Pac was not performed normally, an audible alarm will
sound and "CAMERR" will be displayed on the LCD screen.
- To stop the alarm, press the + and - keys simultaneously for about one second.
- Turn the power back on. If the alarm is not generated, there is no problem.
LCD screen:
Memory Error
If the data in the transmitter is not transferred normally when the power is turned on,
an audible alarm will sound and "MEMERR" will be displayed on the LCD.
- To stop the alarm, press the + and - keys simultaneously for about one second.
- Turn the power back on. If the alarm is not generated again, there is no problem.
LCD screen:
Idle-Up Warning
When the power switch is turned on while the idle-up function switch is on, an au-
dible alarm will sound. When the idle-up function switch is turned off, the alarm will
stop.
106
Blink
Blink
Blink
Audible alarm:
Tone sounds (7 times) and stops
(repeated)
Audible alarm:
Tone sounds (7 times) and stops
(repeated)
Audible alarm:
Tone sounds (7 times) and stops
(repeated)
Audible alarm:
Tone sounds (7 times) and stops
(repeated)