FUTABA 3PJ Super Instruction Manual page 82

6. (Slave channel setting)
Call the SLV set-up screen by
pressing the SELECT key
once.
7. Select the slave channel with
the + or - key.
8. (Mixing rate setting)
Call the mixing rate set-up
screen by pressing the SE-
LECT key once.
This setting sets the slave
channel output for the master
channel right side and brake
(back) side or UP side opera-
tion.
9. Adjust the mixing rate with the
+ or - key.
+: Operates in the same direction as master channel operation
-: Operates in the opposite direction of master channel operation
10.Call the opposite direction
mixing rate set-up screen by
pressing the SELECT key
once.
This setting sets the slave
channel output for the master
channel left side and forward
side or DOWN side opera-
tion.
11.Adjust the mixing rate with
the + or - key.
+: Operates in the same diredction as master channel operation
-: Operates in the opposite direction of master channel operation
82
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- Return to the initial value (0%) by
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
pressing the + and - keys simulta-
TH.EXP ATV CUSTOM
neously for about one second.
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
- Return to the initial value (0%) by
DIRECT ST.EXP M.SEL
UP +
pressing the + and - keys simulta-
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
neously for about one second.
Setting range:
ST: Steering
TH: Throttle
3CH: Channel 3
Setting range:
-100~+100%
ST: "RIGH"
TH: "BACK"
CH3: "DOWN"
Setting range:
-100~+100%
ST: "LEFT"
TH: "FWRD"
CH3: "UP"