Timer - FUTABA 3PJ Super Instruction Manual

Timer

The timer function can be used as an up timer, down timer, lap navigation timer, and
lap timer.
The transmitter can operate the timer even outside the timer screen. However, each
time the power is turned on, the timer screen is called and the timer must be set.
Up Timer/Down Timer
Up timer function
- This function is used to measure the time from start to stop.
- The timer is started and stopped each time the switch is operated and the time from
start to stop is integrated and displayed. (When the count reaches 99 minutes 99
seconds, it is returned to zero and counting is repeated.)
- The initial start operation can be linked to the throttle trigger.
- An audible alarm (alarm/prealarm) can be set. A tone will be heard every minute
after starting.
Alarm: A tone is heard at the set time.
Prealarm: A tone is heard at the set time from the alarm.
-After starting, the timer is effective even if the display is switched to another screen.
The timer can be stopped by switch.
Down timer function
- This function is used to measure the time from start to stop. (The remaining time is
displayed.)
- The timer is started and stopped each time the switch is operated and the time from
start to stop is counted down and displayed. The start time is the alarm set time.
(When the time is counted down to 00 minute 00 second, the timer operates as an up
timer.)
- The initial start operation can be linked to the throttle trigger.
- An alarm tone (alarm/prealarm) can be set. A tone is heard every minute after start-
ing to indicate the elapsed time.
Alarm: An alarm tone is heard at the set time.
Prealarm: An alarm tone is heard the set time before the alarm.
- After starting, the timer is effective even if the display is changed to another screen.
The timer can be stopped by switch.
64